Disassembly and Reassembly _ 23
Part
Figure
Description
Assy Case Brake
Assy case brake
Inlet
)ORZPHWHU
Outlet
Preparation:
* Make sure to disconnect the power, water
supply, and drain hose connections.
5HPRYHWKHXSSHU ORZHUEDVNHWVLQWKH
dishwasher.
* Pull out the dishwasher carefully.
5HPRYHWKHWZRVFUHZVRIWKHIUDPHOHIW
5HPRYHWKHIUDPHOHIW
Caution
Make sure to wear gloves when removing it. Be
careful as the steel plate is sharp and may cut
you.
3. Remove cover brake by rotating.
(counterclockwise) Use a jig. If you do not
have a jig, you can use a needle nose pliers.
(Be careful when removing the cover as it is
easily damaged.)
4. Loosen the four (4) clamps and release the four
(4) hoses from the Assy case brake.
Caution
Water remaining in the Assy case sensor and
Assy case break will come out. Lay a towel on
WKHÀRRUWRDEVRUEDQ\ZDWHUWKDWPD\FRPH
out.
ఐ
Reassembly is in the reverse order of the removal.