20 _ Disassembly and Reassembly
Part
Figure
Description
Assy Sump
- Upper parts
)LOWHU0HVKERG\
Cover Sump
Preparation:
* Remove the baskets, nozzles and storm wash
nozzle.
- Refer the each disassembly section to separate.
1. Release the 13 screws on Assy sump.
([FHSWWKHWZRVFUHZVKROGLQJWKHKROGHUQR]]OH
in the center of the sump.)
7DNHRႇWKH¿OWHUPHVKERG\FRYHUVXPS KROGHU
nozzle L).
3XOORXWWKH$VV\FRYHUVXPSVOLJKWO\DQGKROGDQG
rotate the duct nozzle and Assy case sump together.
5HPRYHWKHVFUHZWKDWLV¿[LQJWKHLPSHOOHUDQG
circulation motor shaft.
Caution
Use gloves for your hand to hold the impeller during
removing the screw. Be careful, the impeller can
injure your hands if gloves are not worn.
(Only for DMT800, DW80F800,DW80J5050 Series)
4. Remove the plate-distribute.
5HPRYHWKHFDVHVFUROO&KHFNLIWKHVHDOUXEEHU
scroll is normal. If it is damaged or hardened,
replace it.
6. Remove the cutter disposer
Caution
Both sides of cutter are sharp. Be careful when
removing it. When replacing the cutter, place the
side with the “U” facing up.
: Place the removed parts in a safe location to
prevent them from being damaged.
7KH':)':)PRGHOVKHDWHULV
GLႇHUHQWVKDSH
ఐ
Reassembly is in the reverse order of the removal.