28 _ Disassembly and Reassembly
ఐ
Reassembly is in the reverse order of the removal.
Part
Figure
Description
Water Valve
5HPRYHWKHWZRVFUHZVIURPWKH%DVH
/LIWXSWKHLQOHWYDOYHDQGGLVFRQQHFWWKHLQOHW
valve wire connector.
3. Release the hose clamp and disconnect hose.
Caution
Caution : When removing the hose clamp, take
care to hold it tightly. The clamp is under tension
and if released, it can become a projectile.
Caution
There will be a residual amount of water in the
valve and valve hose. Use a towel to absorb the
water when removing the valve.
Thermistor
Preparation:
•
Disassemble the shutter.
- Refer to “shutter” disassembly section.
1. Disconnect the wire terminal connected to the
thermistor.
5HOHDVHWKHWZRVFUHZVRIWKHUPLVWRU
3. Pull out it carefully.
Inspect the “O” ring seal on the thermistor. If it is
damaged in anyway, replace the “O” ring seal.