Samsung DMR57 Series, Руководство по обучению

Страница: 49 / 71

49
1) Open the door and unscrew the screws of Front
Frame and Front Tub (12 screws)
[Caution]
- When you unscrew all the screws, the Front Tub may
spring closed, be careful.
2) After separating the Fan Motor terminal, put the Front
Frame assembly down on the floor.
3) Disassemble the terminal connected to the
DISPENSER. You must disassemble both the left and
right terminals.
4) Unscrew 6 screws securing the DISPENSER.
It is fixed to the tub front with a hook. Use a flat
screwdriver to remove it from the tub front.
※ Check List
▶
Because there is a risk of leakage after
replacement, check whether it is sealed
properly.
▶
The voltage on the terminals should measure
120VAC or a resistance of ~2.3 Ω
Dispenser Replacement
1.
2.
3.
4.
Open the door and unscrew the screws of Front Frame and Front Tub (12 screws)
[Caution] - When you unscrew all the screws, the Front Door may spring closed, be
careful. After separating the Fan Motor terminal, put the Front Frame assembly
down onto the floor. Disassemble the wiring connected to the DISPENSER. You
must disassemble both the left and right terminals. Unscrew 6 screws securing the
DISPENSER. It is fixed to the tub front with a hook. Use a flat screwdriver to
remove it from the tub front.