Samsung A500 - SPH Cell Phone, Руководство пользователя

Страница: 23 / 136

Section 2: Understanding Your Phone
2A: Your PCS Phone - The Basics 22
Using the Battery
Battery Capacity
Your PCS Phone is equipped with a Lithium Ion (LiIon) battery. It allows
you to recharge your battery before it is fully drained. The battery
provides approximately 2.5 hours of continuous digital talk time
(1 hour in analog) or approximately 216 hours of continuous digital
standby time (15 hours in analog).
When the battery reaches 5% of its capacity, the battery icon blinks. When
there are approximately two minutes of talk time left, the phone sounds
an audible alert every 30 seconds and then powers down.
Note:
Long backlight settings, searching for service, vibrate mode and
browser use affect the battery’s talk and standby times.
Tip:
Be sure to charge your phone’s battery and watch your indicator to
ensure your levels are okay.
Installing the Battery
Your PCS Phone comes with a LiIon battery. Follow these steps to
install it:
1.
Place the battery on the back of the phone, making sure that the
plastic tabs are aligned with the corresponding holes in the phone.
2.
Gently push the battery down until it snaps into place.
Removing the Battery
To remove your battery for charging or for another reason, follow these
easy steps:
1.
Make sure the power is off so that you don’t lose any stored numbers
or messages.
2.
Push the battery release latch up and pull the battery away from the
phone at a 45 degree angle.