《105》
FAQ
[Case 4]
The camera is not recognised by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
→
Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again, and
then turn on the camera.
[Case 5]
There is an unexpected error during file transfer
→
Turn the camera power off and on again. Transfer the file again.
[Case 6]
How do I know my computer supports a USB Interface?
→
Check the USB port in your computer or keyboard.
→
Check the OS version. A USB Interface is available in Windows 98, 98SE, 2000,
ME .XP.
→
Check [Universal Serial Bus controllers] in Device Manager. Do the following to
check [Universal Serial Bus controllers].
Win 98/ME : Trace [Start
→
Settings
→
Control Panel
→
System
→
Device
Manager
→
Universal Serial Bus controllers].
Win 2000
: Trace [Start
→
Settings
→
Control Panel
→
System
→
Hardware
→
Device Manager
→
Universal Serial Bus controllers].
Win XP
: Trace [Start
→
Control Panel
→
System
→
Hardware
→
Device
Manager
→
Universal Serial Bus controllers].
There must be USB Host Controller and USB root hub under [Universal Serial
Bus controllers].
In addition, double-click on the USB Universal Host Controller and the USB Root
Hub to check if the Device Status states "This device is working properly". If the
Device Status says the device is "not working properly", click the "Driver" tab and
then click [Update Driver] or [Reinstall Driver].
→
When all the conditions mentioned above are met, the computer can support the
USB interface.
[Case 7]
When using the USB hub.
→
There may be a problem in connecting the camera to the PC through the USB
hub if the PC and the hub are not compatible.
Wherever possible, connect the camera to the PC directly.
[Case 8]
Are other USB cables connected to the PC?
→
The camera may malfunction when it is connected to the PC at the same time as
another USB cable. In this case, disconnect the other USB cable, and connect
only one USB cable to the camera.