《55》
Starting the slide show
■
Images can be displayed continuously at pre-set intervals.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
●
Setting play interval: Set the slide show play interval.
1. Use the Up/Down buttons to select the [INTERVAL] menu
and press the Right button.
2. Use the Up/Down buttons to select the desired interval.
3. Press the OK button to save the configuration.
●
Repeat setting : Repeat or not the slide show after finishing
the first cycle.
1. Use the Up/Down buttons to select the [REPEAT] menu and press the Right button.
2. Use the Up/Down buttons to select the desired sub menu.
[OFF] Selected : The slide show is closed after one cycle.
[ON] selected
: The slide show is repeated until cancelled.
3. Press the OK button to save the configuration.
●
Start the slide show: The slide show can start only in the [START] menu.
1. Use the Up/Down buttons to select the [START] menu.
2. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button ( ) again to resume the slide show.
- Press the Menu button to stop the slide show.
●
The loading time depends on the image size and quality.
●
While the slide show is playing, only the first frame of a movie file is displayed.
In case of a voice file, the voice recording icon will appear.
INFORMATION
2048
◀
▶
SLIDE
INTERVAL
REPEAT
START
1 SEC
ON
EXIT:MENU
MOVE:
▲
▼