Samson TROVIS 3730-1 Скачать руководство пользователя страница 93

Страница: 93 / 144

EB 8484-1 EN

8-1

Operation

The work described in this section is only to be performed by personnel appropriately quali-

fied to carry out such tasks.

Risk of fatal injury due to the ignition of an explosive atmosphere.

Observe EN 60079-14 (VDE 0165, Part 1) for work on the positioner in potentially ex

plosive atmospheres.

Work in potentially explosive atmospheres must only be performed by personnel who has

undergone special training or instructions or who is authorized to work on explosion-pro-

tected devices in hazardous areas.

Crush hazard arising from moving parts on the valve.

Do not touch any moving valve parts while the control valve is in operation.

Before performing any mounting or installation work on the positioner, put the control
valve out of operation by disconnecting and locking the supply air and control signal.

Do not impede the movement of the actuator and plug stem by inserting objects into the
yoke.

8.1

Changing the reading direction of the display

The display reading direction can be rotated by 180°. If the displayed data appear upside

down, proceed as follows:

1. Turn

until Code

appears.

2. Press

to confirm the selected code.

blinks.

3. Turn until the display is set in the desired direction.
4. Press

to confirm selected reading direction.

DANGER

WARNING

Содержание TROVIS 3730-1

















































































































































Результаты поиска

Содержание TROVIS 3730-1

Отзывы:

Бренды по названию

Популярные бренды

Samson TROVIS 3730-1, Перевод оригинальной инструкции

Результаты поиска

Содержание TROVIS 3730-1

Отзывы:

Бренды по названию

Популярные бренды