Samson TROVIS 3730-1, Перевод оригинальной инструкции

Страница: 106 / 144

10-2 EB 8484-1 EN
Servicing
10.2 Firmware updates
Contact your local SAMSON engineering
and sales office or subsidiary
(
u
www.samsongroup.com > About
SAMSON > Sales offices ) to request a
firmware update.
Required specifications
Please submit the following details on re-
questing a firmware update:
− Type
− Serial number
− Configuration ID
− Current firmware version
− Required firmware version
10.3 Periodic inspection and
testing of the positioner
We recommend inspection and testing ac-
cording to Table 10-1 at the minimum.
Table 10-1: Recommended inspection and testing
Inspection and testing Action to be taken in the event of a negative
result
Check the markings, labels and nameplates on
the positioner for their readability and complete-
ness.
Contact SAMSON when nameplates or labels are
damaged, missing or incorrect to renew them.
Clean any inscriptions that are covered with dirt
and are illegible.
Check the positioner to ensure that it is mounted
firmly.
Tighten the any loose mounting screws.
Check the pneumatic connections. Tighten any loose male connectors of the screw
fittings.
Renew any air pipes or hoses that leak.
Check the power supply wires. Tighten any loose cable glands.
Make sure that the stranded wires are pushed into
the terminals and tighten any loose screws on the
the terminals.
Renew damaged wires.
Check error messages on the display (indicated
by the fault alarm icon).
Troubleshooting (see the 'Malfunctions' section).