www.larius.com
10
PNEUMATIC HOIST 200
ED. 01 - 10/2019 - Cod. 150097
F
• THE USE OF ANY ACCESSORIES OR TOOLING OTHER
ThAN ThOSE RECOMMENDED IN ThIS MANUAL, MAy
CAUSE DAMAGE OR INJURE ThE OPERATOR.
•
ThE FLUID CONTAINED IN ThE FLEXIBLE hOSE CAN BE
vERy DANGEROUS. hANDLE ThE FLEXIBLE hOSE CARE-
FULLy. DO NOT PULL ThE FLEXIBLE hOSE TO MOvE ThE
EQUIPMENT. NEvER USE A DAMAGED OR A REPAIRED
FLEXIBLE hOSE.
The high speed of travel of the product in the
hose can create static electricity through di-
scharges and sparks. It is suggested to earth
the equipment. The pump is earthed through
the earth cable of the supply.
The gun is earthed through the high pressure
flexible hose.
All the conductors near the work area must
be earthed.
• NEVER SPRAY OVER FLAMMABLE PRODUCTS OR SOL
-
vENTS IN CLOSED PLACES.
• NEVER USE THE TOOLING IN PRESENCE OF POTENTIALLY
EXPLOSIvE GAS.
Always check that the product is compatible
with the materials composing the equipment
(pump, spray gun, flexible hose and accessories)
with
which it can come into contact. Never use paints
or solvents containing Halogen Hydrocarbons
(as the Methylene Chloride)
. If these products come
into contact with aluminium parts can provoke
dangerous chemical reactions with risk of
corrosion and explosion.
Avoid approaching too much to the pump piston
rod when the pump is working or under pressure.
A sudden movement of the piston rod can cause
wounds or finger squashing.
TAKE PROPER SAFETy MEASURES FOR ThE PROTECTION OF
hEARING IN CASE OF wORK NEAR ThE PLANT.
IF ThE PRODUCT TO BE USED IS TOXIC, AvOID INhALATION
AND CONTACT By USING PROTECTION GLOvES, GOGGLES
AND PROPER FACE ShIELDS.
The conditions of guarantee do not apply in the
following situations:
- improper washing and cleaning of components
causing malfunction, wear or damage to the
equipment or any of its parts;
- improper use of the equipment;
- use that does not conform with applicable national
legislation;
- incorrect or faulty installation;
- modifications, interventions and maintenance that
have not been authorised by the manufacturer;
- use of non-original spare parts or parts that do
not correspond to the specific model;
- total or partial non-compliance with the
instructions provided.
CONDITIONS OF GUARANTEE
DANGERS
MOVING PARTS OF EQUIPMENT
All moving parts, such as the Group of rising and
falling pressure plate may cause damage to the
upper extremities.
• Do not approach with hands for the moving parts
during operation of the equipment.
• During the ascent and descent of the hoist keep hands
pressing plate and the rim of the container material.
•
Keep hands away from pump during operation material
priming piston and compressed air is supplied to the
unit whenever.
• Before performing any maintenance or repair, di
-
sconnect the compressed air supply and arrange for
decompression of the pump and of the hoist to the
rest position (
see diagram F/1 phase A
).
THESE INSTRUCTIONS REFER TO THE CORRECT
USE OF THE PNEUMATIC RAM. IN ADDITION, READ
CAREFULLY THE INSTRUCTIONS CONTAINED IN
THE MANUALS RELEVANTSTO THE DIFFERENT
COMPONENTS (PNEUMATIC PUMP, DELIVERY
GUN, ETC.) WHICH CAN BE USED WITH THE RAM.
