www.larius.com
15
PNEUMATIC HOIST 200
ED. 01 - 10/2019 - Cod. 150097
Make 4 holes in the ground near
the 4 holes on the base plate.
FIXING WITH SCREW ANCHORS
If you need to fix by using steel anchors for concrete and masonry
you must follow the following procedures:
• Check the floor leveling and if necessary to shim mounting
elements in order to achieve perfect alignment of the com
-
ponents;
• Holes must be the same size as those in the base plate. It
is possible to fix the base plate whose existing holes can be
used as a guide to drill the floor with precision in a single
operation;
• The depth of the holes drilled in the concrete of no importance
for the expansion of the gusset and does not affect his estate
provided that it is made of a puncture with minimum depth
sufficient to allow the full roll-out of the plug;
• Insert the expansion bolts by tightening until completely
locking.
Recheck the correct level.
Drill
Insert the dowel
Screw the dowel
Fig. 17
N
