www.larius.com
6
PNEUMATIC HOIST 200
ED. 01 - 10/2019 - Cod. 150097
A
Transfer version
This type of double-effect single column extrusion ram allows
for
LARIUS
Nova, Omega, Vega, Ghibli
series pneumatic piston
transfer pump elevation.
Extrusion ram use allows for pump suction unit driving during the
product suction phase directly inside 200-litre drums.
This system allows for the safe, clean transfer of material for
use from the storage container directly into the application area.
This safe, reliable system allows empty drums to be replaced
with new drums in just a few minutes.
WORKING PRINCIPLE
Below shows the main steps of the working principle of the hoist transfer version
Fase A
The rest position with hoist
lowered.
Fase B
Extrusion ram raising, drum
positioning under the extrusion
ram
Fase C
Extrusion ram lowering to the
product level inside the drum
Fig. 1
