2
853 809 R. 03/18
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
2018_03_20-10:00
EN
DESCRIPTION
Compressed air powered reciprocating piston pump. This high flow capacity pump is compatible with mineral and synthetic oils and suitable for
large installations with long length piping supplying several fluid outlets simultaneously.
This pump can be mounted on the wall, with wall mounting bracket (Part. No. 360132).
WARNINGS
WARNING!
Read all instruction manuals, tags, and labels before
operating the equipment. This equipment is for professional use only.
• The use of non compatible fluids may cause damage in the pump and
serious personal injury. This equipment is not intended for use with
fluids that fall within the Group 1 fluid as defined that are explosive,
extremely flammable, highly flammable, flammable, very toxic, toxic,
oxidizing or where the vapor pressure if greater than 0,5 bar (7 psi)
above the pressure atmospheric at the maximum allowable
temperature.
• The pump generates high or very high pressures. Do not exceed the
maximum air inlet pressure of 12 bar (170 psi). A direct hit against the
human body may result in an injury.
• This unit may have stored pressure, release all pressure and disconnect
from any fluid systems before servicing. To ensure safe operation of
this unit, all service work should be by qualified personnel only.
• When not in use, be sure to shut off the air supply to avoid accidents.
!
• Do not alter or modify this equipment. Use only Samoa Industrial, S.A.
genuine components. Any unauthorized tampering with this
equipment, improper use, poor maintenance or removal of
identifications labels may invalidate the guarantee.
• All fittings in the system connected to the outlet of the pump should
be suitable for the maximum possible pressure generated by the
pump/air motor. If the systems cannot be designed to take the
maximum pressure produced by the pump, safety valves or diverter
valves should be fitted.
INSTALLATION
This pump can be mounted directly on the wall
, using the
bracket 360132. Firmly fix the bracket to the wall. Put the pump on it
and fix with included screws (fig. 1).
TYPICAL INSTALLATION
Please see figure 2, a typical installation shown with all the recommended accesories for the pump to operate correctly.
NOTE:
The compressed air supply must be between 40 and 180 psi (2 - 12 bar), and 80 to 100 psi is ideal.
Fig. 2
TO OIL
CONTAINER
POS. DESCRIPTION
Part No.
A
Ball Valve, Low Pressure
950 319+239 004
B
Filter/Regulator
241 001
C
Air hose
362 100
D
Quick coupling
251 412
E
Connection nipple
255 312
F
Pump
537 630
G
Pressure Relief Valve
609 008
H
Oil hose
362 303
I
Ball Valve, Medium Pressure
950 303
J
Wall bracket
539 004
K
Oil suction hose
367 003
L
Ball Valve, Low Pressure
950 306
360132
Fig. 1
1500 mm
1000 mm
