Index revision : C - March 2016
35
7105
10.6. Paint needle
•
Step 1
: Unscrew the notched button at the rear of
the spray gun, retrieve the spring.
•
Step 2
: Press the trigger and pull manually the
paint needle towards the back.
WARNING : Every 4 or 5 reassemblies, add some
red dielectric grease (Ref.: H1GSYN037) in the passage channel in the barrel.
10.7. Switch
•
Step 1
: With a 5,5 mm screwdriver, unscrew the
shouldered screw. Pull upwards the lever of the
switch.
•
Step 2
: Replace the o-ring (
see § 13.3 page 52
).
Insert the new switch into its housing. Coat with
low threadlocker the fastening screw and tighten
the screw so that the switch is slightly resistant.
Step 1
Step 2
Step 1
Step 2
