Index revision : C - March 2016
22
7105
7.2. With diaphragm pump for all versions
Note: m
0
3
/h
volume at 1013 mbar atmospheric pressure and a temperature of 20°C (68°F) .
It is recommended to fit the diaphragm pump with a valve on the return line to the paint container
to prime the pump and stir the paint.
WARNING : For the safety of the painter, the paint container, the diaphragm pump, and the paint
filter, if it is metal, must be electrically grounded.
1
Part to be painted
2
NANOGUN-MV Spray Gun
3
Single-phase mains, 220 V, 50 Hz +
ground or 115 V+ ground
4
Air pressure regulator 0-6 bar - 50 m
0
3
/h
(for adjusting the spraying air)
5
Compressed air network
6
Stop cocks
7
Oil-removing filter
9
Air pressure regulator 0-6 bar - 5 m
0
3
/h
For adjusting the regulator control
pressure (paint flow rate setting)
10
Air pressure regulator 0-6 bar - 20 m
0
3
/h
(for adjusting the pump air supply)
12
Potentially explosive atmosphere
13
Area with no risk of explosion
14
Paint flow rate regulator
15
Diaphragm pump (complies with ATEX
Directive)
16
Strainer
17
Paint container
DES05937
