Index revision : C - March 2016
28
7105
9. Misuse of the Apparatus
The non-exhaustive list below describes some major misuses of a paint spraying device.
WARNING : Sames Technologies would like to remind users that the instructions below MUST
be strictly complied with.
It is forbidden to
install the control module in a potentially explosive atmosphere.
It is forbidden to
subject the paint or air hose or spray gun power cable to excessive and repeated
tension strain.
It is forbidden to
disconnect the electrical connector in a potentially explosive atmosphere.
It is forbidden to
leave air or paint hoses trailing on the floor or in areas where they are liable to be
crushed or broken by industrial vehicles.
It is forbidden to
use the
NANOGUN-MV
to spray a liquid other than a paint or clear coat.
It is forbidden to
drop the spray gun or subjecting it to impacts.
It is forbidden to
leave the spray gun on the ground.
It is forbidden to
use the spray gun to handle or move the parts to be painted.
It is forbidden to
leave the spray gun to soak in solvent or spraying it with solvent.
It is forbidden to
spray solvent before switching off the control module.
It is essential to
connect the control module ground terminal to the paint apparatus ground terminal.
It is essential to
tighten the two safety screws on the electrical connector.
