SAMES KREMLIN 64350225130000, Руководство пользователя

Страница: 25 / 238

Environment
582108110-EN-indG-Pompe Azur-52C225.docxx
25
4 Environment
The equipment must be installed on a horizontal, stable and flat ground
(eg concrete slab).
Non-moving equipment must be secured by suitable fixing devices
(spit, screws, bolts, etc.) to ensure its stability during use.
To avoid risks due to static electricity, the equipment and its
components must be grounded.
For pumping equipment (pumps, elevators, chassis, etc.),
a 2.5 mm section wire is attached to the equipment. Use
this wire to connect the equipment to the general
“earth”. In severe environments (mechanical protection
of the ground wire, vibrations, moving equipment, etc.)
where damage to the grounding function is likely, the
user will have to replace the wire of 2, 5 mm supplied, by
a device more adapted to its environment (wire of
greater section, braid of mass, fixing by lug with eyelet
…).
Have the earth continuity checked by a qualified
electrician. If earth continuity is not assured, check
terminal, wire and grounding point. Never operate the
equipment without solving this problem.
The gun must be "grounded" through the fluid hose.
When spraying from a gun, the fluid hose must be
conductive.
The materials to be painted must also be “grounded” by
means of clamps with cables or, if they are suspended,
by means of hooks which must remain permanently
clean.
Note: all objects in the work area must also be grounded.