SAMES KREMLIN 64350225130000, Руководство пользователя

Страница: 196 / 238

Operations Dismantling / Reassembling the C225 Fluid section
582108110-EN-indG-Pompe Azur-52C225.docx
196
When changing the seal 909420311 (between flange)
Extract the seal with a flat screwdriver.
Then replace a new gasket and grease the gasket on the
contour more evenly.
Manually remove the product cylinder.
To take off the cylinder:

type in the mallet presence painting)
Using the vice, and tightening the clamp vertically:

Unscrew the 4 tie rods with a 19 mm wrench.
Reassembly
Attention
Vertical winding - attention tightening torque
When coupling the motor with the fluid section:

place the nuts on the tie rods without tightening
them.
Beat the vacuum pump (0,5 bar 7.25 psi max) (5 ways).
Tighten the nuts diagonally to a torque of 100 N.m.
Tools needed
19
19