Operator's Manual
Truck Snow Plow
SnowPick
-
9
-
WARNING!
When transported the snow plow should be secured properly so as to prevent
its shifting. When placing the snow plow on a transport vehicle, it should be
lifted up by transport holders are marked with special labels. When lifting
use lifting devices with a load capacity not less than snow plow’s overall
weight.
Both carrier and driver are responsible for machine transport. All equipment and parts must
be secured for transport. In order to move plow onto other means of transport, follow the below
rules:
For hoisting do use hoists with capacity bigger than the machine weight as indicated on its data
plate. It also applies to the necessary cables and chains,
transport belts, belt suspensions, ropes cannot be damaged. Whenever damages to these parts
are found, replace these with new ones,
Grab the machine by any lifting devices only in places indicated by hook sign (Fig. 4),
When mounting slings, chains, clamps, etc. always keep in mind the center of gravity of the
machine (Fig. 5),
For seizing the machines pick lines of adequate length, so that the angle between them was no
greater than 120°, and the angle of inclination between the cable and the vertical was no greater
than 60°,
when relocating the machine onto another vehicle, there should be no unauthorized personnel
permitted to remain within the danger area,
The machine should be protected from shifting on the vehicle's trailer.
Fig. 4. Points of lifting plow when moving
