Operator's Manual
Truck Snow Plow
SnowPick
-
20
-
transverse ground following, enabling to pass through surfaces with minor transverse
unevenness by following it profile. Owing to its construction, the plow can be inclined by 5° to
the right and to the left in relation to the hitch (Fig. 17),
Fig. 17. Plow's transverse ground following
side bumpers protecting the plow against side impacts, e.g. hitting a curb,
inclined shield – after an obstacle is hit, this will incline by 55°
.
Thanks to incline mechanism
fitted on the shields at rubber clearing bars it is possible to pass through even 5
″
(12 cm) high
curbs. However, bear mind, that if rubber clearing bar is worn by e.g.: 2
″
(5 cm) – such plow
will be able to pass through a 2
″
(5 cm) lower a curb,
torsional shield – after an obstacle is hit with end points on the shield and the pressure is
exceeded in the hydraulics, the shield will make a turn.
6.1. Transport and parking position
When transporting lift the plow using hydraulic cylinder and lift and lock the support foot.
When the plow is in parking position its shield should lean the ground. When the plow is not
mounted on a vehicle it should rest on the support foot and have the aligned shield (Fig. 15).
Fig. 18. Position of SnowPick plow: a) parking, b) transport
When driving on public roads comply with local traffic regulations.
NOTE
When transported the plow should be in stable position enabling its safe
transport.
5°
b)
a)
