Sam4s SPS-500, Быстрая настройка

Страница: 38 / 63

- 38 - SPS-500
Employee Sign on with MCR
Employee Time Keeping With MCR
If you wish to use Employee time keeping with the Magnetic card reader then ensure the following options are
set:-
•
Select PGM-MODE , then SYSTEM OPTIONS , PAGE DOWN and select TIME KEEPING OPTIONS
and ensure EMPLOYEE SIGN-IN/OUT is set to CLOCK IN CODE
•
Select PGM-MODE then EMPLOYEE , then EMPLOYEE again.
•
Select the CLOCK IN CODE option and either swipe the employee card or enter the employee clock
in code.
•
Select a JOB CODE and a PAY RATE for the employee
•
Select PGM-MODE , then EMPLOYEE and select AUTHORITY LEVEL
•
Select the required authority level and set the CLOCK IN/OUT USING MCR option to YES
•
In REG mode, press the CLK IN/OUT button to time in/out the clerk and swipe the employee card.
•
Select the JOB CODE and press OK .