49
Tel: 886.909 602 109 Email: [email protected]
8.
Document operation
8.1.
Introduction
This chapter mainly introduces document management function and menu structure of corresponding
【
Save/Recall
】】
key of S3101
Cable & Antenna Analyzer. You may perform operations such as saving, recalling, copying, and deleting etc. to internal memory of
Analyzer, external extension storage devices and documents between them via submenu.
The Analyzer provides a fast access to internal memory with large capacity, while supports external Mini SD card and USB external
storage devices connecting. It is used for setting store status and measured data etc. of Analyzer. Save/Recall function set by instrument
saves a lot of operating time on parameters setting and accelerates measurement speed. Save/Recall function supports comparative
analysis over measured data or storing data in specific format for the convenience of analyzing and processing in externally controlled
software.
Storage medium is internal memory in default state. Instrument setting and measured date will be stored into internal memory of Analyzer
by default.
8.2.
Set Save Location
User may pay attention to the storage location of documents first if you want to store Sweep Trace or status during usage. Analyzer is set
by default to store in internal memory of system, which is also displayed as [Internal] on screen. If you want to edit storage location, you
may operate as follows:
1) Press
【
Save/Recall
】
.
2) Press [Location [Internal]] menu and enter storage location menu bar.
3) Click corresponding storage location menu on storage location menu bar and complete storage location setting, as shown in Figure
8-1:
Figure 8-1 Location Selection
8.3.
Save State
User may complete corresponding documents storage based on your needs after selecting document save location. This part mainly
introduces status storage and recall. Detailed steps are as follows:
