Tel: 886.2.2175 2930 Email: [email protected]
60
5.4.2
The Application of the X-Y Operation
Select X-Y format in Utility menu. More information, please refer to
The Application of the X-Y Operation
5.5
Set Vertical System
Click “Channel” in main menu.
Select Channel: User can select the channel CH1, CH2, Math and Reference.
Channel Setting:
ON/OFF: Tap CH1 or CH2 icon on the top left corner of the screen.
Volt/DIV: Use gestures to set volt/div.
Coupling: Select the channel coupling DC/AC/GND.
Probe: Select the attenuation factor for the probe. To check the probe attenuation setting, toggle the probe menu to
match the attenuation factor of the probe.
More information, please refer to
Invert
The invert function turns the displayed waveform 180 degrees, with respect to the ground level. When the
oscilloscope is triggered on the inverted signal, the trigger is also inverted.
The following picture shows the waveform before inversion:
