6
You can continue to make smoothies one after the other. There is no need to rinse the container
between Smoothies unless there is a flavour from the previous creation that you do not want
mixed into the subsequent one.
When you have finished blending your Smoothies, remove the container from the motor
assembly and wash properly along with the lid and the stir-stick.
Cleaning of the valve is covered in detail in the section “Cleaning Your Smoothie Maker”
but a quick tip to rinsing out the valve is to fill the container half full with water and, with
the machine running, to drain the water through the valve into a glass.
Thicker Smoothies
To make a thicker Smoothie, add more frozen ingredients.
Thinner Smoothie
To make a thinner Smoothie, add more liquid ingredients.
Important:
This appliance can be used as an ordinary blender when the dispensing tap is
replaced with a blending cap. The handle on the body of the mixing container may also be
removed or installed as preferred.
To remove the dispensing tap, screw the tap anti-clockwise until it comes loose. Screw the
blending cap on clock-wise and ensure that this is firmly in place before using the appliance
(refer figure 1 below).
To install the handle, refer figure 2 below. This will enable the contents to be poured out more
easily when the appliance is use solely as a blender.
Figure 1
Figure 2