Sakura Tissue-Tek Autowrite Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 68

Sakura Tissue-Tek Autowrite Скачать руководство пользователя страница 48

4.4

Revised 3/04/11

OPERATING INSTRUCTIONS

Once the magazine(s) have been refilled, pressing the

[LOADED]  key informs  the printer  that all magazines  have
been  refilled.  The  printer  assumes  that  slides  of  the  same
color  have  been  added  to  the  empty  magazine  and
resumes the interrupted print job.

Display Indications

The following are common indications that may be

displayed during normal operation.

Display indications

(in combination with Mag. Empty LED)

01 Magazine no. 1 empty

02 Magazine no. 2 empty

03 Magazine no. 3 empty

Display indications-Status Messages

00 Clean cycle in progress

11 Temperature in the curing lamp power supply is

too  high.  (If  temperature  does  not  drop  to  within
the  allowed  range  in  10  minutes,  ERROR  55  is
displayed).  Switch the instrument to the OFF position
and let cool; check the ambient temperature.

12 Drying station temperature is too low/too high. (If

temperature does not drop to within the allowed
range in 6 minutes, ERROR 43 is displayed).

13 Maximum working life of the curing lamp has

been reached. If this message is ignored, the
resistance of subsequent printouts can be affected.

15 Print head cleaning screen prompt requesting the

operator to manually clean the print head.

«
...
46
47
48
49
50
...
»

Содержание Tissue-Tek Autowrite





































































Отзывы:

Нет отзывов