Sakai SV410-2, Руководство по ремонту

Страница: 145 / 270

6-015
VIBRATORY DRUM • REAR AXLE
2-3-2. Reassembly of vibratory drum
Before reassembling, confirm that each part
that was disassembled has been well cleaned
and is free of any abnormality.
1) Lightly apply gear oil to the press-fitting surface
of the roller bearing (13) outer race.
Drive the outer race of the roller bearing (13)
into the housing (11).
Attach the oil seal (12).
2) As shown in the figure on the right, firmly secure
the axle shaft (32) with support stands and/or
wooden blocks.
Lightly apply gear oil to the press-fitting surface
of the vibrator bearing (33).
Drive in the vibrator bearing (33).
3) Using a crane, lift and invert the axle shaft (32)
subassembly.
Axle shaft subassembly: 90 kg (198 lbs.)
Lightly apply gear oil to the press-fitting surface
of the roller bearing.
Attach the inner race of the roller bearing (13).
•
•
•
•
•
•
SV400-2-06028
11
13
13
12
SV400-2-06028
11
13
13
12
SV400-2-06029
Wooden block
Wooden block
Support stand
32
33
SV400-2-06029
Wooden block
Wooden block
Support stand
32
33
SV400-2-06030
Wooden block
32
13
SV400-2-06030
Wooden block
32
13