Sailor 6390 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 61

Sailor 6390 Скачать руководство пользователя страница 3

98-139768-A

iii

Safety summary

Observe the following general safety precautions during all phases of operation, service and repair of this
equipment. Failure to comply with these precautions or with specific warnings elsewhere in this manual
violates safety standards of design, manufacture and intended use of the equipment. Thrane & Thrane
A/S assumes no liability for the customer's failure to comply with these requirements.

Ground the equipment

To minimise shock hazard, connect the SAILOR 6390 Navtex Receiver to an electrical ground and follow
the cable instructions.

Warranty limitation

The SAILOR 6390 Navtex Receiver is not a user maintainable unit, and under no circumstances should
the unit be opened beyond the outer plastic cover, except by authorized personnel. Unauthorized
opening of the unit will invalidate the warranty.

Installation and service

Installation and general service must be done by skilled service personnel. The SAILOR 6390 Navtex
Receiver is intended for use in a protected environment (-15° to +55°C) according to IEC-60945.

Compass safe distance

Compass safe distance: 20 cm (Standard magnetic compass), 20 cm (Emergency magnetic compass)
from the SAILOR 6390 Navtex Receiver.

«
1
2
3
4
5
...
»

Содержание 6390






























































Отзывы:

Нет отзывов