Sailor 6390 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 61

Sailor 6390 Скачать руководство пользователя страница 21

98-139768-A

4-1

Chapter 4

4444

Configuration

Configuration

4

This chapter has the following sections:

•

•

System and Navtex app installation

•

Configuration with the Service Interface

•

4.1

Start up

4.1.1

To Power on and off

As soon as DC power is provided the SAILOR 6390 Navtex Receiver is on.

To switch on the SAILOR 6004 Control Panel push the power button. Operate
the SAILOR 6004 Control Panel by tapping the touch screen. To switch off
the SAILOR 6004 Control Panel

push and hold the power button for 2

seconds and follow the instructions on the screen.

If the Control Panel cannot switch off normally (e.g. due to a fault): Push and
hold for 12 seconds.

4.1.2

Dim and night mode

Turn the dim knob of the SAILOR 6004 Control Panel to increase or decrease
the display brightness. The display goes into

night mode

either when turning

the dim knob on the front panel counterclockwise or when the internal light
sensor detects the light level for changing to night mode.

To dim to level zero push the power button once. If an alarm appears while the display is in
level zero, the display returns to the latest dim value and the alarm is displayed.

Note

When the remote switch in the SAILOR 6004 Control Panel is wired and it is
switched on, you can only use the Power button to reboot the SAILOR 6004 Control
Panel, you cannot switch it off.

«
...
19
20
21
22
23
...
»

Содержание 6390






























































Отзывы:

Нет отзывов