Configuration with the Service Interface
4-4
Chapter 4: Configuration
98-139768-A
4.3
Configuration with the Service Interface
Before the SAILOR 6390 Navtex Receiver can be used on board you must set up several
parameters. To do this, use the Service Interface.
The Service Interface is a web interface built into the software of the SAILOR 6390 Navtex
Receiver. No installation of software is necessary. You access it from a computer with a
standard Internet browser (Firefox or Chrome recommended).
4.3.1
Accessing the Service Interface
You can start the Service Interface in several ways:
•
Using a PC with ThraneLINK Management Application (TMA)
•
Using a PC and an Internet browser
(Firefox or Chrome recommended)
Using a PC with ThraneLINK Management Application (TMA)
To access the Service Interface via the TMA do as follows:
1. Make sure that DC power is provided for the SAILOR 6390 Navtex Receiver.
2. Connect a PC to the same network as the SAILOR 6390 Navtex Receiver (preferably a
direct connection to the Ethernet connector of the SAILOR 6390 Navtex Receiver).
3. Start the TMA (v. 1.04 or higher) and click on the SAILOR 6390 Navtex Receiver (TT-
6390 NAVTEX).
4. Click the icon
Management
and then
Web interface
. The Service Interface opens in a
browser window.
Using a PC and an Internet browser
To access the Service Interface with a PC and an Internet browser do as follows:
1. Switch on the SAILOR 6004 Control Panel and make sure that DC power is provided for
the SAILOR 6390 Navtex Receiver.
Figure 4-4: Accessing the web interface using the TMA
Содержание 6390
Страница 8: ...Table of contents viii 98 139768 A ...