SAIC RTR-4 Скачать руководство пользователя страница 95

Страница: 95 / 116

RTR-4 Operator’s Manual

System Operation

120300 Rev. D

SAIC Proprietary

4-59

the supplied external power adapter to the notebook while it is not

in use will recharge a discharged battery. Using the external

power adapter while the notebook is in use will also charge a

discharged battery, but at a slower rate. Check with appropriate

notebook manufacturer documentation for recharge times.

Imager Battery Replacement

Description

Follow this procedure to replace the DR-35S battery in the

Integrated Imager unit.

Prerequisites

Verify all power is off and the Imager is not connected to other

RTR-4 components or to external power.

Procedure RTR0029

Replace the battery as follows:

STEP

ACTION

Unscrew the cover screw and open the battery

compartment cover.

Pulling on the string loop in the battery end, remove

the discharged battery.

WARNING

Substituting batteries is dangerous. Use only the

10.8Vdc, 9 cell NiMH provided. Use of any other

battery may cause explosion or fire. Failure to

comply may result in personnel injury.

Position replacement battery so that the “This side

Up” label is facing the rear of the Imager, and insert

into battery compartment.

RTR0029a

LOOP

BATTERY

Содержание RTR-4





















































































































Результаты поиска

Содержание RTR-4

Отзывы:

SAIC RTR-4, Руководство оператора, Страница: 95 / 116

Результаты поиска

Содержание RTR-4

Отзывы: