
RTR-4 Operator’s Manual
120300 Rev. D
SAIC Proprietary
5-11
• Power: 12Vdc (supplied by CU-4 Controller’s Control Unit or
the Notebook Controller’s Battery Box.)
X-Ray Source & Imager Relationship
When acquiring an image, the target object must be positioned so
that it is as close as possible to the Imager’s signal acquisition
screen (face) which is denoted by the white rectangular outline on
the flat side of the Imager unit.
The X-ray source unit should be positioned approximately
60-90cm (24-35in) from the Imager with its beam centered on and
perpendicular to the Imager face.
The two large knobs on the side of the Imager unit must be
loosened prior to adjusting the imager’s handle. If the knobs are
not sufficiently loosened before adjusting or moving the handle,
the Imager may be damaged.
When scanning objects on the ground that cannot or shouldn’t be
moved, the Imager is oriented so that its face is as close to the
ground or working surface as possible.
Содержание RTR-4
Страница 1: ...RTR 4 Portable Digital X Ray Imaging System Operator s Manual 120300 Rev D 15 February 2003...
Страница 12: ...Introduction RTR 4 Operator s Manual 1 4 SAIC Proprietary 120300 Rev D...
Страница 36: ...System Description Setup and Quick Start RTR 4 Operator s Manual 3 20 SAIC Proprietary 120300 Rev D...