manualshive.com logo in svg

SAIC RTR-4, Руководство оператора, Страница: 92 / 116

Поделиться
Скачать
SAIC RTR-4 Скачать руководство пользователя страница 92

System Operation 

RTR-4 Operator’s Manual

4-56

SAIC Proprietary

120300 Rev. D

were associated with the incidents. The exported incidents are not 

deleted from the initial system. 
The import operation merges external database incidents into the 

existing database. Duplicate files are not copied.

Shutting Down and Stowing the RTR-4

Shutdown and Stow the RTR-4 (Wired or Wireless 
Configurations)

Description

Follow this procedure to shut down the RTR-4. Step numbers with 

the letter “a” apply to the wireless configuration only. Step 

numbers with the letter “b” apply to the wired configuration only. 

Prerequisites

There are no prerequisites for this procedure.

Procedure RTR0028

Shutdown and stow the RTR-4 as follows: 

STEP

ACTION

1

Exit the RTR-4 imaging software.

2

At the Windows desktop, select 

Shut Down

 from the 

Start

 menu. 

3a

Remove the WiFi NIC and place it into its protective 

cover.

3b

Disconnect the 30cm (1ft) communications adapter 

cable from the controller and the communications 

cable reel.

4

If the controller external ac adapter was used, 

unplug it from both the controller and the 110Vac 

source. 

5

Close the controller cover and place the following 

components (as applicable) into the transport case:

• Notebook controller.
• External ac adapter.
• WiFi NIC 
• 30cm (1ft) communications cable adapter.

6

At the imager, set the 

POWER

 switch to the off 

position.

Содержание RTR-4





















































































































Отзывы:

Нет отзывов