SAIC RTR-4, Руководство оператора, Страница: 70 / 116

System Operation RTR-4 Operator’s Manual
4-34 SAIC Proprietary 120300 Rev. D
Distance
Measurement
(Ctrl+D)
Select to place a measuring crosshair cursor on
the image. Move the cursor to the desired first
location, then click to set the base position.
Move to the second location, a mobile line is
displayed with another crosshair at the new
end. Click to set the endpoint and the distance
between the two set points is displayed in a
dialog box.
Show Select to show a dialog box displaying the date
and time that the selected image was acquired.
Also shows the serial number of the Control
Unit used to capture the image, the number of
pulses used to acquire the image, and whether
the image has been modified.
Selecting the Show > Cumulative Pulse
Count command displays the total number of
pulses requested of the X-Ray source since the
last reset.
Switch
Buffers (F7)
Select to switch between the Original Buffer
and the Modified Buffer. The current buffer on
the display is highlighted in the Status Bar.
Clear Buffer Select to erase the image located in the
displayed buffer, clearing the display.
COMMAND DESCRIPTION