SAIC MOTOR MG HS, Руководство пользователя

Страница: 304 / 319

Maintenance
Cleaning with High Pressure Cleaner
You must abide by the operation instructions for cleaning
the vehicle with a high pressure cleaner, especially the
pressure and jet distance should be kept in an enough
distance from the flexible material (such as rubber hose
or sound insulation).
Do not use a circle beam nozzle or rotary nozzle, especially
the tyres are never allowed to be cleaned with the circle
beam nozzle, and it may cause damage even the jet distance
is long and action time is very short.
IMPORTANT
• Please pay attention to the operating instructions of
high pressure cleaner.
• Soft parts on the vehicle should be kept in a large
enough distance from the high pressure cleaner.
Waxing
A high quality wax layer can be very good to protect the
automotive paint against harmful environmental impacts,
even have a protective effect on slight hard crashes. If you
find that water drops can no longer smoothly roll down on
clean paint, you shall recoat the vehicle with a high quality
hard wax curing agent. You shall apply hard wax at least
twice a year to protect the automotive paint even in regular
use of wax curing agent for cleaning the vehicle with the
automatic cleaning equipment. If the painted surfaces are
recently waxed, the insect infectant adhering to the bonnet
and front bumper in warm seasons is usually very easy to
remove.
Polishing the Paintwork
Polishing is only required when the automotive paint has
tarnished and can not return to the bright appearance by
waxing.
If the applied polishing agent does not contain waxy
composition, you must wax the paint after polishing;
occasionally treat the paint surface with an approved polish
containing the following properties:
• Very mild abrasives to remove surface contamination
without removing or damaging the paint.
• Filling compounds that will fill scratches and reduce
their visibility.
• Wax to provide a protective coating between the paint
and the elements.
290