SAIC MOTOR MG HS, Руководство пользователя

Страница: 217 / 319

Starting & Driving
2 Operating: in Standby mode, when the vehicle drives
down the acute downhill surface, and the driver
does not depress the brake and accelerator pedal,
if the vehicle speed is higher than 8km/h but less
than 35km/h, HDC system will automatically enter
into the Operating state. Meanwhile, HDC indicator
on the instrument pack flashes green, which may
be accompanied by the working noise of the brake
system, and the vehicle speed is obviously reduced.
When driving forward, the target speed under the
control of HDC system is 8km/h.
When reversing, the target speed under the control of
HDC system is 8km/h.
3 Temporary Deactivation: depress the accelerator
pedal or brake pedal to a certain extent in Operating
mode, HDC system will temporarily remove itself
from the operating state.
4 Off: press HDC switch again to turn off HDC system.
Note: For MT models, HDC function can be applied
only in the 1st gear.
Note: When the vehicle steers at a fast speed on the
hill with a certain gradient, HDC system may switch
from Standby mode to Operating mode.
Note: With HDC system in operative, the brake
system will automatically pressurize and hold, when
depressing the brake pedal at this time, you will be
responded with a certain pressure feedback, which is
normal during the operation of HDC system.
HDC ON/Malfunction Indicator Lamp
Refer to "Warning Lights and Indicators" in "Instruments
and Controls" chapter.
203
4