SAIC MOTOR MG HS, Руководство пользователя

Страница: 224 / 319

Starting & Driving
Stability Control System (SCS) and
Traction Control System (TCS)
Stability Control System (SCS)
SCS is designed to assist the driver in control of driving
direction. The SCS automatically enters Standby mode
after the engine is started.
When SCS detects that the vehicle is not moving in the
intended direction, it will intervene by applying brake force
to selected wheels or through the engine management
system to prevent sliding and assist in bringing the car back
to the right direction.
Traction Control System (TCS)
TCS contributes to maintain the control to the vehicle
by improving the vehicle's traction trafficability and driving
stability. TCS monitors the driving speed of each wheel
individually. If spin is detected on one wheel, the system
automatically brakes that wheel, transferring torque to the
opposite, non-spinning wheel. If both wheels are spinning,
the system will reduce engine speed in order to regulate
wheel rotation until traction is regained.
Switching On/Off
SCS and TCS are automatically switched on when the
ignition switch placed in position ON. And they can be
turned off by operating the switch "Stability Control". The
operation interface is located on the entertainment display.
When SCS and TCS are switched off, the message
centre of instrument pack will illuminate the Stability
Control/Traction Control System OFF Warning Lamp.
Refer to "Warning Lights and Indicators" in "Instruments
and Controls" chapter.
Note: Disabling SCS and TCS will not affect the
operation of ABS. Always disable SCS and TCS when
driving with snow chains fitted.
Stability Control/Traction Control Warning
Lamps
Refer to "Warning Lights and Indicators" in "Instruments
and Controls" chapter.
If the battery cable has been disconnected for any reason,
upon reconnection the warning lamp will illuminate yellow.
Please operate as follows:
210