SAIC MOTOR MG HS, Руководство пользователя

Страница: 220 / 319

Starting & Driving
wheels to under-steer, thereby preventing the vehicle from
rollover.
Note: With ARP in use, the vehicle under-steers and it
is normal if it fails to steer fully according to the intent
of the driver during the operation of ARP.
Emergency Braking Hazard Warning Lights
Control System (HAZ)
With the car driving at high speed, when the driver makes
an emergency brake, the system will automatically enable
the brake lamp strobe to remind the following vehicles,
thereby effectively reducing the risk of rear-end collision
accidents.
Note: With the hazard warning lamp turned on,
the emergency braking hazard warning lights control
system (HAZ) will not function.
After HAZ is activated, when the car is not in emergency
brake condition (e.g. when the deceleration is small), the
brake lamp strobe function will stop after several seconds.
Note: If the car speed is less than 10km/h when the
brake lamp strobe stops, the hazard warning lamp
will illuminate automatically. Short press the hazard
warning lamp switch or speed up to above 20km/h for
5s to turn off the hazard warning lamp.
Electronic Differential System (XDS)
Your car is provided with electronic differential system
(XDS). In case the understeering occurs when making a
turn at high speed, the system will apply the brake to the
wheels at inner side to improve the accuracy of steering.
Note: XDS will shut down as SCS and TCS are turned
off, please refer to "Stability Control System (SCS)
and Traction Control System (TCS)" in "Starting and
Driving" chapter.
206