SAIC MOTOR MG HS, Руководство пользователя

Страница: 74 / 319

Instruments and Controls
When the ignition switch is set to ACC or ON/RUN/
START, you can operate the sunroof.
The sunroof consists two pieces of glass and one sunshade.
The front glass can be opened by sliding or tilting, the rear
one is fixed-type and cannot be opened, and the sunshade
can slide open. Switch 1 will be used to operate the sunroof
sunshade, and switch 2 will be used to operate the sunroof
glass. The opening methods can be identified according to
the switch icons.
Sunroof Glass Operation
Open the Sunroof Glass by Tilting
2
1
3
4
Push up the sunroof glass switch to the 1st position (1)
and hold, the sunroof will automatically tilt open. You can
stop the movement of the sunroof at any time by releasing
the switch. Push up the glass switch with excessive force
to the 2nd position (2) and then release, the sunroof will
automatically open to the end.
Close the Sunroof Glass by Tilting
Pull down the sunroof glass switch to the 1st position (3)
and hold, the sunroof will automatically close. You can stop
the movement of the sunroof at any time by releasing the
switch. Pull down the glass switch with excessive force
to the 2nd position (4) and then release, the sunroof will
automatically close to the end.
Close the Sunroof Glass by Sliding
2
4
3 3
1 1
60