71
RCI88
9 Universal remote control
The remote control is a universal model. You can program it to control your TV as well. The supported
devices are listed in the Brand Code List.
After programming the remote press
to switch from Digital HD-Video-Recorder mode to TV
mode. The LED flashes once in short interval. The LED also flashes after each command is transmitted to
the TV.
These are the main controls for the direct control of your television:
•
Standby/Wake up
•
Volume up / down, mute
•
Changing channels, keys
P+
and
P-
•
Four
arrow
keys
, , , ,
•
Access to the TV menu, key
Press
to return to Digital HD-Video-Recorder mode.
9.1 Programming the universal remote control
Refer to the brand code list for the right four-digit code for your TV.
1.
Turn on your TV.
2.
Press
and
at the same time for at least 3 seconds, until the LED on the remote
flashes two times.
3.
Enter the 4-digit code for your TV or the universal code. Make sure that not more than 10 seconds pass
between the entry of each number. After entering the first 3 digits the LED flashes one time in short
interval. After the fourth digit the LED flashes 2 times short and then remains lit.
4.
Press
until your TV turns off.
5.
Release the
key.
6.
Press
for 3 seconds to confirm the code.
7.
Press
to use your TV.
If you do not see your TV in the code list, please enter the code "0000" in step 3 and keep
pressed
until your TV turns off. The remote control now starts a search through all the available codes. This
process may take some time.
Содержание RCI88-1000 V2
Страница 1: ...User manual Digital HD Video Recorder RCI88 320 V2 RCI88 1000 V2...
Страница 2: ...RCI88...
Страница 89: ......
