19
RCI88
3 Initial installation
If the Digital HD-Video-Recorder is plugged in and turned on for the first time, the installation wizard
starts.
1.
Turn on your TV. If your TV does not automatically recognize the connected and powered Digital HD-
Video-Recorder, select the AV source to your TV (HDMI ®, analog or SCART AUDIO / VIDEO
connector), on which the TV is currently connected to the Digital HD-Video-Recorder.
2.
Open the cover of the smartcard reader on the front of the
Digital HD-Video-Recorder. Slide the smartcard into the
card slot. The smartcard must be inserted with the chip
facing down.
3.1 Preparation: Device checks the device settings
The following tests are performed by the installation wizard automatically. Your intervention is not required
normally.
The Digital HD-Video-Recorder searches for the cable signal. If no signal is detected, make sure that the
antenna cable is properly connected. If the test has been interrupted, press
on your remote control to
proceed with the installation.
If the Digital HD-Video-Recorder does not find a signal, contact the customer service of Kabel
Deutschland.
The Digital HD-Video-Recorder verifies that you have inserted the smartcard into the device. You
received a smartcard from Kabel Deutschland, insert it into the smartcard reader. The smartcard must be
inserted with the gold chip facing down. If you do not have the smartcard at hand, press
on the
remote control to continue the installation without smartcard. Until you use the smartcard, you can only
use free channels.
The Digital HD-Video-Recorder automatically searches the cable network for new and improved software
for your Digital HD-Video-Recorder. If new software is available, the Digital HD-Video-Recorder
downloads it and reboots.
3.2 Language settings
The default language for the operation of your Digital HD-Video-
Recorder is German. If you want to set a different language,
press
on the remote control. You can choose between
the languages German, English, Turkish and Russian. Use the
keys to select a language and confirm your selection by
pressing .
Note
The assignment of the
button on your remote changes depending on
the steps you perform. During installation, the current function assignment of
the
button always appears at the bottom right on your television
screen.
Содержание RCI88-1000 V2
Страница 1: ...User manual Digital HD Video Recorder RCI88 320 V2 RCI88 1000 V2...
Страница 2: ...RCI88...
Страница 89: ......