22
RCI88
Input ready
on the on-screen keyboard and press
on your remote control. Now, the Digital HD-
Video-Recorder checks the network and internet connection.
If the Digital HD-Video-Recorder is connected to the internet, the message
The internet connection
has been set up
appears. In addition, the LED light flashes on the wireless stick.
2.
If you choose to connect via a network cable (LAN cable), check if the network cable is connected to
the Digital HD-Video-Recorder and to the router as shown in chapter 2.3.2,
Internet connection via
network cable
. Press and
on your remote control to select
Via a LAN cable
. The device will
automatically establish an internet connection.
If the internet connection is lost, it can be established later pressing
on your remote control
and selecting
Settings
(see chapter 7.2.5,
Internet
).
3.3.4 Step 4: Select energy mode
In the fourth step you decide whether your Digital HD-Video-
Recorder consumes less energy overall but starts slowly, or if
you wish a rapid operation of the Digital HD-Video-Recorder
but want to take into account a higher overall energy
consumption of the device. Select one of the modes:
Active
,
Quick Start
and
Keep Standard
.
The default is the
Standard
mode, it causes the lowest power
consumption and a longer start-up phase.
The
Active
mode has the highest power consumption and
keeps the equipment ready at any time.
The
Quick Start
mode allows you to choose the times at which the device remains in Active mode and
when it falls into the Standard mode. Use the keys ,
and press
on your remote control to select
one of the specified modes.
If you have selected the
Quick Start
mode, enter the start time, for example 1 7 0 0 for 17:00 hrs
(=5 p.m.), using the number buttons on your remote control.
Use the arrow button and press
on your remote control, to select for how many hours the Digital
HD-Video-Recorder mode shall remain active. Use the arrow button and press
on your remote
control to choose on which days this mode should be active, for example,
Daily
or only on
Mondays
,
Wednesdays
and
Sundays
.
Save your settings pressing
on your remote.
The message
The Energy Mode has been selected
appears on the TV screen, confirm it pressing
on your remote.
You may press
on your remote control and
Settings
at any time to change the power mode
later (see chapter 7.2.4,
Energy settings
).
3.3.5 Step
5:
Summary
After choosing the power saving mode in step 5, you receive a
summary of the successful installation. Now you will see a list
of the settings you have made during the installation.
Now press
on your remote to confirm the yellow marked
field
Watch TV
and go to the TV program.
Содержание RCI88-1000 V2
Страница 1: ...User manual Digital HD Video Recorder RCI88 320 V2 RCI88 1000 V2...
Страница 2: ...RCI88...
Страница 89: ......
