18
RCI88
2.7 Powering On / Off the Digital HD-Video-Recorder
You have all the equipment (Digital HD-Video-Recorder, TV, VCR) connected? Connect the Digital
HD-Video-Recorder to the power network and turn it on. To turn on the Digital HD-Video-Recorder
proceed as follows:
1.
Make sure that the power switch "On / Off" on the back of the Digital HD-Video-Recorder is set to "Off"
(position 0).
2.
Now connect the power cord to the power connector of the Digital HD-Video-Recorder.
3.
Plug the power cord into a power outlet near the equipment so you can easily access it.
4.
Press the "On / Off" button to switch the Digital HD-Video-Recorder on (position I).
The initial installation of your Digital HD-Video-Recorder will start automatically.
If you need to turn off the Digital HD-Video-Recorder (for example, before a long period without using it),
proceed as follows:
1.
Make sure that no recordings take place (Rec button on the front is red) or are prepared (the Rec button
on the front glows green). Stop the recording when necessary (see chapter 5,
Recording a program
).
2.
Press the STANDBY button on the remote control or on the front of the Digital HD-Video-Recorder to
switch the Digital HD-Video-Recorder to standby mode.
3.
Press the "on / off" switch on the back of the Digital HD-Video-Recorder to turn off the Digital
HD-Video-Recorder (position O).
4.
Unplug the power cord from the socket.
I
O
EIN /
AUS
23W
230V~50Hz
VIDEO
DIGIT
AL
AUDIO
KABEL
EINGANG
KABEL
AUSGANG
L
ANALOG
AUDIO
VCR SCAR
T
TV SCAR
T
USB
USB
NETZWERK
Содержание RCI88-1000 V2
Страница 1: ...User manual Digital HD Video Recorder RCI88 320 V2 RCI88 1000 V2...
Страница 2: ...RCI88...
Страница 89: ......