Sagemcom F@st 5260
Chapter 3:
USB Sharing
NOTE:
This step will fail if your printer is not connected or does not
support IPP.
You may also have to power-cycle your printer when changing
USB hosts.
9.
Choose the applicable printer driver, then click OK.
If the printer was previously installed on this PC, then the driver should appear in the list
under the proper manufacturer and printer name.
If you don’t see your printer, check the bottom of the list for your manufacturer. Printers are
not always listed alphabetically.
10.
If your driver does not appear, you will need to locate the correct driver and click Have
Disk to install it.
11.
If everything is configured correctly, the Wizard will display the message, "You’ve
successfully added ‘your printer name’
on
‘IP address’." Click Next.
38
