17
DCI85HD KD
3 Initial installation
If the Receiver is plugged in and turned on for the first time, the installation wizard starts.
1.
Turn on your TV. If your TV does not automatically recognize the connected and powered Receiver,
select the AV source to your TV (HDMI ®, analog or SCART AUDIO / VIDEO connector), on which the
TV is currently connected to the Receiver.
2.
Open the cover of the smartcard reader on the front of the
Receiver. Slide the smartcard into the card slot. The
smartcard must be inserted with the chip facing down.
3.1 Preparation: Device checks the device
settings
The following tests are performed by the installation wizard automatically. Your intervention is not required
normally.
The Receiver searches for the cable signal. If no signal is detected, make sure that the antenna cable is
properly connected. If the test has been interrupted, press
on your remote control to proceed with the
installation.
If the Receiver does not find a signal, contact the customer service of Kabel Deutschland.
The Receiver verifies that you have inserted the smartcard into the device. You received a smartcard from
Kabel Deutschland, insert it into the smartcard reader. The smartcard must be inserted with the gold chip
facing down. If you do not have the smartcard at hand, press
on the remote control to continue the
installation without smartcard. Until you use the smartcard, you can only use free channels.
The Receiver automatically searches the cable network for new and improved software for your Receiver.
If new software is available, the Receiver downloads it and reboots.
3.2 Language settings
The default language for the operation of your Receiver is
German. If you want to set a different language, press
on the remote control. You can choose between the languages
German, English, Turkish and Russian. Use the keys to select
a language and confirm your selection by pressing
.
Note
The assignment of the
button on your remote changes depending on
the steps you perform. During installation, the current function assignment of
the
button always appears at the bottom right on your television
screen.
