45
DCI85HD KD
7.2.3.7 Startup channel
Select
On
, if the Receiver should always show the Kabel Deutschland channel on startup. Select
Off
, if
the Receiver should always show the last viewed channel on startup.
1.
Use the keys ,
to select
Start channel
. Press
or
.
2.
Use the keys ,
to select
Off
, if the Receiver should
always show the last viewed channel on startup. Use the
keys ,
to select
On
, if the Receiver should always show
the Kabel Deutschland channel on startup.
3.
Press
to confirm.
7.2.4 Energy
settings
In this menu you decide whether your Receiver consumes less energy overall, but starts slowly, or if you
wish a rapid operation of the Receiver, but want to take into account a higher overall energy consumption
of the device. Select one of the modes:
Standard
,
Energy Save Mode
,
Quick Start
and
Active
. The
default is the
Standard
mode, it causes the lowest power consumption and a longer start-up phase.
To change this setting:
1.
Press
on your remote. Use the keys ,
to
select
Settings
. Press
.
2.
Use the keys ,
to select
System set-up
. Press
or
.
3.
Use the keys ,
to select
Energy settings
. Press
or
.
4.
Use the keys ,
to select
Standard
,
Energy Save Mode
,
Quick Start
or
Active
. Press
. A
description of the different modes is displayed.
Standard
: This mode helps you minimize your energy consumption. For this reason your Receiver takes
longer to start and switches off automatically if the remote control is not used. The duration until automatic
switch-off can be determined.
1.
Use the keys ,
to select
Standard
.
2.
Press
two
times.
3.
Use the keys ,
to select the time in hours, until the device turns off automaticcally and press
.
4.
Use the key to select
Confirm
and press
.
Energy Save Mode
: In the Energy Save Mode your Receiver consumes little energy on standby. In
contrast to the standard mode the Receiver does not switch off automatically.
1.
Use the keys ,
to select
Energy Save Mode
.
2.
Press
two
times.
Quick start:
In the quick start mode you can set on which days, at what time and for how long your
Receiver automatically turns on from standby mode to active mode. The Receiver switches to active
mode for the duration you determined.
1.
Use the keys ,
to select
Quick start
.
2.
Press
.
3.
Enter a start time using the number keys of your remote, for example
1 7 0 0
for 17:00 hrs (=5 p.m.).
