64
DCI85HD KD
9.2 Selection of the volume control
When a TV code is programmed into the remote, the remote controls the volume of the TV also in
Receiver mode (instead of the Receiver's volume). To change, press
and
at the same time
for at least 3 seconds. The LED on your remote flashes 2 times.
To switch back to TV control mode, keep
and
pressed at the same time for at least 3
seconds. The LED on your remote flashes 2 times.
9.3 Reading out the 4-digit code
Using this method, you can read out the 4-digit code stored in the remote to control the TV.
1.
Press the number key 1 and
at the same time: The LED on your remote shows the first digit of
the code by flashing. E.g., if the first number is 9, the LED flashes 9 times. No flashing means 0 (zero).
2.
Press the number key 2 and
at the same time for the second digit of the code.
3.
Press the number key 3 and
at the same time for the third digit of the code.
4.
Press the number key 4 and
at the same time for the fourth digit of the code.
9.4 Reset the universal remote control
1.
Press
,
and
at the same time for at least 3 seconds. The LED on your remote
flashes 2 times.
2.
All codes stored in the remote will be deleted. After restoring the factory settings on your remote, the
LED flashes twice again.
