Automatic two-sided copying from the document glass
A duplex module must be installed for automatic 1-sided to 2-sided or 2-sided to 2-sided copying. A duplex module is
not needed for 2-sided to 1-sided copying.
1
Place an original on the document glass.
(page 7)
2
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
3
Touch the [1-sided to 2-sided copy] key.
Original
Copy
NORMAL COPYING
The image to be copied onto the second side of 2-sided copies
can be inverted so that the resultant 2-sided copies are in
the correct orientation for binding at the top. For top binding,
touch the [BINDING CHANGE] key on the 2-sided copy
selection screen.
4
Touch the [OK] key.
BINDING
CHANGE
OK
Follow step 3 on page 12 to step 7 on page 13.
1
4