9
NORMAL COPYING
This section describes the normal copying procedure.
Copying from the automatic document feeder
■
■
■
■
■
1-sided copies of 1-sided originals
1
Place the originals in the document feeder tray.
(page 7)
2
Ensure that the 1-sided to 1-sided copy mode
is selected.
A4
A4
A4
A3
A4
A4R
1.
2.
3.
4.
ORIGINAL
The one-sided to one-sided
mode is selected when no
icon for a two-sided mode
appears in the dashed area
on the display. If the 1-sided
to 1-sided copy mode is
already selected, steps 3 to
5 are not needed.
3
Touch the [2-SIDED COPY] key.
2-SIDED COPY
OUTPUT
4
Touch the [1-sided to 1-sided copy] key.
The [1-sided to 1-sided] key
will be highlighted.
5
Touch the [OK] key.
OK
0
6
Ensure that paper of the same size as the
originals is automatically selected.
(
✼
Note)
COPY RATIO
AUTO
PAPER SELECT
100
%
A4
The selected tray will be
highlighted or the message
“LOAD xxxxxx PAPER.” will
appear. If the message ap-
pears, load paper in a pa-
per tray or the bypass tray
with paper of the required
size. Even if the message
above is displayed, copying
can be performed onto the
currently selected paper.
(
✼
Note) The following requirements must be satisfied.
●
Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2"
x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", A3, B4, A4, A4R or
A5) are set and the auto paper select function is enabled.
TRANSPA
A4
1
X
A4
A3
1.
2.
3.
PLAIN
PLAIN
If originals of a size other
than the sizes above are to
be copied, manually select
the desired paper size.
Original
Copy
