Sagem AGORIS M943, Руководство пользователя

Страница: 132 / 134

MF 5990 - Agoris M943
- 132 -
16 -
Characteristics
Cards
Before starting printing cards, print out a test on standard paper to check page formatting.
Recommendations for use
Use cards for laser printers.
Do not use cards:
• Coated.
• For ink-jet printers.
• Pre-cut or perforated.
• Pre-printed or multicoloured.
Transparencies
It is possible to print continuously on transparencies, but feed problems may occur due to the media quality, the
accumulation of static electricity and the print environment.
Before starting printing transparencies, print out a test on standard paper to check page formatting.
Recommendations for use:
• Only use transparencies for laser printers.
• Only use transparencies for black and white printing.
• Regularly clean the printer paper path as transparencies are highly sensitive to dirt.
• Remove printed transparencies from the output tray to prevent the accumulation of static electricity.
• Avoid handling transparencies before loading them into the paper tray as fingerprints may affect print quality.
• Do not use transparencies:
– For colour printing.
– For ink-jet printers.
Main and additional paper tray Secondary paper tray
Capacity Up to 200 cards depending on
thickness.
Maximum height 49.4 mm Up to 55 cards depending on
thickness.
Maximum height 17.5 mm
Orientation Print side facing up Print side facing up
Driver Standard paper
Weight 64 to 90 g/m² (17.1 to 24 lb)
Duplex See section Which paper formats can be used? [ 128].
Note
If the cards are deformed, flatten them befo-
re loading them into the paper tray.
Main and additional paper tray Secondary paper tray
Capacity Up to 100 transparencies.
Maximum height 12.4 mm Up to 100 transparencies.
Maximum height 11.9 mm
Orientation Print side facing up Print side facing up
Driver Transparency
Weight 64 to 90 g/m² (17.1 to 24 lb)
Duplex Not supported