Acoustic Fluid Logger and Pressure Pulse Gas Gun
29
•
Is the Acoustic Fluid Logger turned on?
•
Is the battery charged?
Why won’t the unit come on?
•
Is the battery charged?
•
Is the unit turned on? Check for the on/off bulb to light when the unit is turned on.
•
Did the header print? Check to see that the printer advances the paper and prints a header when
the fluid logger power switch is turned on. If so, the unit is on and something else is wrong.
Why is the unit printing lightly or printing strange shapes?
•
Has the Acoustic Fluid Logger been charged lately? A low battery charge can result in light
printing. The thermal printer must have a charged battery to print the signal to the thermal paper.
Try charging the unit overnight. If the unit still won’t print, the battery needs to be replaced.
Why is the tape rolling, but not printing a trace on the paper ?
•
Has the thermal paper been loaded correctly? Thermal paper is coated and printable on only one
side. When loading paper, hold the roll in your left hand, with the tape coming off the bottom of
the roll – in other words, when you pull on the tape with your right hand, the paper tail rolls out to
the right and the
roll has paper coming off the bottom of the roll.
•
If the paper is loaded correctly and still not printing, is the paper yellowed or discolored? Thermal
paper should not be stored in high temperatures or in sunlight, or it loses its printability over time.
For best results, store extra thermal paper in the office, not in a hot work truck.
Содержание Acoustic Fluid Logger III
